1. Preparation / Washing
- Preparation is KEY. Wash and thoroughly clean the area you will be applying to.
- Dry the application area and degrease thoroughly with Xpro degreaser.
- Make sure the area is dry before application.
XPro ClearCoat
Xpro Clearcoat je inovatívny produkt, ktorý dodáva povrchu mimoriadne vysoký lesk, obnovuje lesk zvetraného a opotrebovaného laku a pomáha odstraňovať škrabance.
Xpro Clearcoat sa aplikuje ručne.
Balenie Xpro Clearcoat s objemom 100 ml postačuje na ošetrenie vozidla strednej veľkosti.
XPro ClearCoat
Cez 3000 výdajných miest
po celom Slovensku
Doručenie do druhého dňa
na akúkoľvek adresu
Garancia doručenia
nepoškodeného tovaru
Podrobný popis
2. Annex
- Shake the bottle.
- We recommend applying the product with a folded paper towel or Xpro applicator , as these applicators allow for the best application of Xpro car polish.
- Make sure they are thoroughly soaked with varnish.
- We recommend keeping the bottle handy - if your cloth | applicator starts to dry out during application, apply more as you process.
- Start at the top corner of the panel.
- Hold the cloth | applicator with a flat hand. Using very light pressure, slide from end to end along the panel. Evenly apply the product to the panel.
- You will have a 1-2 minute window to work. Do not go back after this time period. Avoid repeats!!!
*** Please note that if there is a significant mistake made when applying your coating and you need to remove it - removing the coating is much easier within 5 minutes of the initial application. If you need to remove the coating in that 5 minute window, we recommend scrubbing the coating with our degreaser. You can then reapply the Xpro Automotive Paint .. If you need to remove the coating after it has started to cure, we recommend sanding the area with p2000 water based sandpaper.